BST-HSDAQ6 now available

High-speed data logging, without the lab price.

Six differential channels at up to 500 kHz each, recorded straight to microSD. Plug the logger into your phone’s USB-C port. The phone powers it and the HS-DAQ app controls it. No laptop, no external power supply, and no batteries to charge.

6Differential channels
500kHzMax sample rate per channel
up to16-bitResolution
USB-CPowered by your phone
The BST-HSDAQ6

Everything you need to capture fast signals in the field.

Slightly smaller than a smartphone, it goes wherever the measurement is: test benches, vehicles, machinery and anywhere a laptop and a rack of instruments won't fit.

Simultaneous sampling

All six channels are sampled together, so phase and timing between signals are preserved.

Impulse capture

High-speed triggering catches impacts, shocks and transients, with pre-trigger history so you can see what happened just before the event.

microSD and Bluetooth

Every recording is saved on the logger with a checksum. Switch to Bluetooth whenever a cable gets in the way.

Powered by your phone

One USB-C cable to your phone powers the logger and carries the data. It's a complete measurement kit that fits in a pocket.

One-step zeroing

Measure and store each channel's offset on the logger. Every new recording starts already zeroed.

Owner key

Lock the logger with a passphrase so no one else within Bluetooth range can control it or read its data.

Specifications

Built to measure.

Calibration, channel names and units are stored in every file, so recordings open in engineering units with no extra setup.

ModelBST-HSDAQ6
Analog inputs6 differential voltage inputs, ±10 V, sampled simultaneously
Sample rateUp to 500 kHz per channel
ResolutionUp to 16-bit
StoragemicroSD card
TriggeringHigh-speed level trigger, rising or falling, on any channel, with pre-trigger samples for impulse capture
Capture modesOn demand, triggered (single or continuous), at power-up
SizeSlightly smaller than a smartphone
PowerUSB-C, from a phone, computer or USB power source
ConnectivityUSB-C (data and power); Bluetooth Low Energy; no driver needed
Real-time clockKeeps time while powered off (CR1220 backup cell); every recording is time-stamped
Data exportBinary with CRC-32, CSV in engineering units
SoftwareHS-DAQ for Android (8.0+), iOS coming soon, open protocol and Python client

Specifications subject to change. Contact us for full electrical specifications.

Developers

An open protocol. Your software.

The logger uses simple text commands, the same over Bluetooth and USB. Use our Python client as-is, or as a reference for your own implementation.

from bst_hsdaq6 import HsDaq, parse_recording, save_csv

with HsDaq.open_ble() as daq:           # or open_serial("COM5")
    daq.zero()                          # inputs at rest
    daq.capture()
    newest = max(daq.list_files(), key=lambda f: f["seq"])
    rec = parse_recording(daq.download(newest["name"]))
    save_csv(rec, "recording.csv")

BST-HSDAQ6 Developer Kit

  • Protocol 1.1: every command, data format and worked example (PDF and Markdown)
  • Python client: command-line tool and library in a single file
  • Test suite: runs offline against a simulated logger, or read-only against real hardware
Download kit (ZIP)

v1.1 · November 17, 2026 · 200 KB · Python 3.8+

Mobile app

Your lab, in your pocket.

Plug the logger into your phone and you have a complete field-deployable measurement system, two devices of about the same size: the phone powers it over USB-C while the HS-DAQ app controls it. Prefer no cable? It works over Bluetooth too.

  • RecordStart a recording, arm the trigger and see the logger's state at a glance.
  • LiveA large readout per channel in engineering units, with the last five seconds plotted.
  • FilesDownload recordings, view each channel with zoom and spectrum analysis, and share as CSV.
  • SetupSample rate, file length, trigger, channel names, units and scaling, clock and owner key.

Requires Android 8.0 or later.

9:41
DAQ1
Connected by USB-C
Ready
The logger is idle
0.5 s per file
500 kHz · 6 channels
Starts recording when Impact rises through 1.000 V
Download automatically
New recordings come to the phone as soon as they're saved
Latest on phone
DATA0007.BIN
0.5 s · 500 kHz · triggered
Live6 channels
100200500Hz
Recording
Sample rate500 kHz
File length0.5 s
Before trigger10 %
Trigger
ChannelImpact
EdgeRising
Level1.000 V
After each fileStop
Channels
Logger
NameDAQ1
The button on the logger…Records at once
ClockSet from phone
Owner keyNot set
Dark mode

Interactive demo · tap the tabs

Desktop software

HS-DAQ Logger for Windows.

The full workbench on your PC. Run several loggers at once, organize recordings into test sessions, compare runs side by side and correct calibration after the fact.

HS-DAQ Logger
HS-DAQ Logger, Live Scope screen

Download for Windows HS-DAQ.zip · 107 MB · unzip and run HS-DAQ.exe, no installation needed
About us

Boston Smart Technologies

We design measurement hardware for engineers who need real performance on a real budget. Our products are engineered in Boston and built around open, documented interfaces, so your data stays under your control.

Performance that's accessible

High sample rates and simultaneous channels at a price that makes sense for every bench.

Open by design

A published protocol and reference code, so you can build exactly the workflow you need.

Engineer-to-engineer support

Questions go straight to the people who designed the product.

Contact

Let's talk about your measurement.

Pricing, volume orders, custom configurations, or technical questions. We usually reply within one business day.

LocationBoston, Massachusetts